Home >Gearmotors >Search by calculation >Condition entry

Hint

Press the "Tab" key to move to the next field. Press the "Shift" and "Tab" keys to move to the last field.

Commercial power supplies Commercial power supply frequency (input shaft rotation speed) = 50Hz (1500rpm) 60Hz (1800rpm) ------------------------------------- Use an inverter Acceleration time Ts = sec Deceleration time Te = sec

D1 = mm D2 = mm D3 = mm [Coupling method] When using sprockets, gears, or similar D4 = mm / D5 = mm When using couplings or similar ( Table shaft direct coupling ) *Input is not required for D4 and D5 fields. M1 = Kg/unit (Work weight) n = Units (No. of work units) M2 = kg M3 = kg N = rpm R = mm μ = (Coefficient of friction) Sf = 1.00 1.25 1.50 (Service factor) C = 1.00 1.50 2.00 3.00 (Correction coefficient) * Not used in calculation when using an inverter. K1 = 1.00 1.25 1.50 (Coupling method coefficient) K2 = 0.75 1.00 1.50 (Load position coefficient) Stop precision =± ° (if required) * Gearmotors with brakes are selected when a value has been entered for the stop precision.