Home >Gearmotors >Search by calculation >Condition entry

Hint

Press the "Tab" key to move to the next field. Press the "Shift" and "Tab" keys to move to the last field.

Commercial power supplies Commercial power supply frequency (input shaft rotation speed) = 50Hz (1500rpm) 60Hz (1800rpm) ------------------------------------- Use an inverter Acceleration time Ts = sec Deceleration time Te = sec

D1 = mm [Coupling method] When using sprockets, gears, or similar D2 = mm / D3 = mm When using couplings or similar * Input is not required for D2 and D3 fields. M1 = kg (Work weight) M2 = kg M3 = kg μ = (Coefficient of friction) (for lifting, use value of 1) η = (Efficiency) L = mm (Lead) V = mm/s m/min (Work speed) Sf = 1.00 1.25 1.50 (Service factor) C = 1.00 1.50 2.00 3.00 (Correction coefficient) * Not used in calculation when using an inverter. K1 = 1.00 1.25 1.50 (Coupling method coefficient) K2 = 0.75 1.00 1.50 (Load position coefficient) Stop precision =± mm (if required) * Gearmotors with brakes are selected when a value has been entered for the stop precision.